Precision Metrology
Portable dimensional inspection with FARO technology.
VISIMAQ supports dimensional verification, fixture validation, machine alignment and large-scale inspection using FARO portable measurement arms and FARO Laser Tracker technology.
FARO Measurement Arm
A portable articulated coordinate measuring system is positioned near the component or fixture. The operator establishes the reference coordinate system, probes critical features and captures points, planes, circles, holes and surfaces directly on the part.
- Portable inspection at the machine, fixture or assembly
- Dimensional verification against CAD data and drawings
- Hole location, profiles, planes and geometric features
- Fixture certification and in-process inspection
- Rapid feedback for corrections and adjustments
FARO Laser Tracker
For large components and assemblies, the laser tracker follows a precision reflector in three-dimensional space. Measurements are collected from multiple positions to establish an accurate coordinate network over a large working volume.
- Large-volume dimensional measurement
- Machine and tooling alignment
- Fixture installation and validation
- Assembly position verification
- Comparison of measured geometry to nominal CAD
01Establish references and datums
02Capture dimensional data
03Compare against CAD / drawing
04Report deviations and corrections
Measurement Workflow
From setup to an actionable inspection report.
Planning & setup
Review drawing requirements, GD&T, CAD references and inspection objectives.
Review drawing requirements, GD&T, CAD references and inspection objectives.
Coordinate alignment
Establish datums and align the measurement system to the part, tooling or machine coordinate system.
Establish datums and align the measurement system to the part, tooling or machine coordinate system.
Data acquisition
Capture required features with the FARO arm or laser tracker according to the inspection plan.
Capture required features with the FARO arm or laser tracker according to the inspection plan.
Analysis & reporting
Compare measured data against nominal geometry and document deviations for acceptance or adjustment.
Compare measured data against nominal geometry and document deviations for acceptance or adjustment.
Typical applications
- Welding fixture dimensional validation
- Machine installation and alignment
- Large fabricated structure inspection
- Tooling and assembly verification
- Reverse-engineering measurement support
- Final dimensional acceptance
FARO Laser Tracker
Large-volume precision measurement.
See the laser-tracker measurement process in operation.